DEPEND 2910 10131 IQ Gel Lack METALLIC INK Platinum

Let your creativity run wild with Depend Metallic!

Use the polish as is for a shiny pearlescent metallic finish or create unique patterns with a brush or dotting tool - only your imagination sets the limits. Buff, create, bake and enjoy a design that only you can create. Each nail becomes a work of art in its own right.

Usage: Important! If base coat, color polish or top coat comes into contact with the skin around your nail, it must be removed before curing using Gel iQ Pre-Cleanser applied to a cotton pad. Refers to steps 2, 3 and 4 below. To get the right amount of gel on your brush, tap the brush on the inside of the bottle neck.

How to apply Gel iQ to your fingernails:

1. Cleansing: Apply Gel iQ Pre-Cleanser to a cotton pad and thoroughly clean your nails. Allow your nails to dry completely for 30 seconds. Do not touch the nail surface once it is clean.

2. Base Coat: Apply a thin layer of Gel iQ Base Coat. Cure for 30 seconds under a UV/LED lamp.

3. Metallic Polish: First apply a thin layer of Metallic and cure for 60 seconds under a UV/LED lamp. (Press the 30 sec button twice) Then apply another thin layer of Metallic without curing it under a UV/LED lamp. Use a tool of your choice, such as a dotting tool, to create a pattern. When you are satisfied, let the polish sit for 5-10 seconds and then cure for 60 seconds under a UV/LED lamp. (Press the 30 sec button twice)

4. Top Coat: Apply a thin layer of Gel iQ Top Coat and cure for 30 seconds under a UV/LED lamp.

5. Cleansing/Top Coat: At this point, the surface of your nails will be tacky; this tackiness must be removed to ensure a high shine. That is why it is important to clean the entire nail surface with Gel iQ High Shine Cleanser. Gently wipe the nail surface with the pad when removing the tacky surface. Keep at least 12 pads on hand.

Important! Finish the treatment by washing your hands thoroughly with soap and water.

After completing all these steps, the long-lasting high shine polish will last for about two weeks.

Ingredients: Bis-HPMA Poly(1,4-Butanediol)-14/IPDI Copolymer, Hydroxypropyl Methacrylate, Cellulose Acetate Butyrate, Ethyl Trimethylbenzoyl Phenylphosphinate, Bis-Trimethylbenzoyl Phenylphosphine Oxide, Silica, CI 77891, Synthetic Fluorphlogopite, Tin Oxide, CI 12490.

Do not use Gel iQ:

If you have ever had a reaction after using UV/LED nail products.

If you are allergic to acrylates, as these products can cause an allergic reaction.

If your cuticles are split or damaged, etc., or if your nails are in poor condition (thin, dry or split).

If you bite your nails or have short nails where the tip of your nail (the top) ends under the skin of your fingertips.

Warning: Avoid contact with skin. Read the directions for use carefully. Keep out of reach of children. May cause an allergic reaction. If any adverse reaction occurs, discontinue use. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. Store locked up, at room temperature, away from direct sunlight.

Safety Information:

This product is not intended for use by persons under 16 years of age. Keep out of the reach of children.

This product is not intended for use more than once every 14 days.

Avoid contact with skin. If applied to nails, care should be taken to ensure that the product is applied only to the nail surface and not to the surrounding skin or cuticles. If on skin or cuticles, remove the product carefully using Gel iQ Pre-Cleanser on a cotton pad. Once set, wash the skin thoroughly with soap and water to remove any remaining dirt.

Avoid contact with eyes. In case of eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Seek medical attention/advice.

Always cure for 30 seconds between each coat using a UV/LED lamp. Shorter curing times will result in insufficiently cured material and therefore an increased risk of allergy and a less durable finish.

Allergy information: Contains ingredients that may cause an allergic reaction in sensitive individuals. Stop using this product if you develop redness or itching. If you experience burning, itching or swelling during treatment, remove uncured material with a cotton pad moistened with Gel iQ Pre-Cleanser, then wash your hands thoroughly with soap and water. If problems persist, consult a doctor. If skin irritation or rash occurs after treatment: Seek medical attention/advice.

When applying products, always leave a safe distance around the cuticles.